I need the following. someone tell me where I can get them. they seem to be unavailable in Japan.
1) a screw of the back plate of MXR's Phase 90.
2) a couple of rubber bushes of the Cry Baby(JEN. not JIm Dunlop)
3) a pic of GAR sucking Savicki's tiny cock
thanks
Don't notice most of my posts are less than 2 lines...
Fender Custom Shop Owners Club
Gibson Custom Shop Owners Club
Cato's YouTube Channel
WTF?Originally Posted by Cato
Trolls take heed...LOG OUT & FUCK OFF!!!
What is your offer for the 1 screw and these two rubber feet?
uhhh huhuhuhhuhuhhh.... in all Japan-hole Land, Cato cannot get anyone to find him a screw.
WANK!
My greatest fear is Diamondjimi working on a photochop for number 3.
He can have my number 2, it's due here around 10am after this first pot of coffee's finished.
I also need 4 screws for my Fender Bullet Amp...
Christ, Cato. Don't you have a Home Depot in Japan?
No need for Photoshopping here. Found some footage of Gar & Savicki on holidays....
That's a 10-24 screw for the handle.
You could re-tap it for 5mm.
it would be cheaper to get that kinda stuff from japan cos thery are made there i think.
Yeah, it would fit your dik perfect!
Only the homoeroticized say such things.
/owned
Pfft
Fuck off and go eat the corn from hefty Lefty's shit!
PwN3D !
what I need are inch screws shithead.
wrong.
stop posting useless shit and go away.
Why not just pound a couple nails thru the handle, or use baling wire?
I have a few JEN-made wahs.. one's a black Vox, the other a Super CryBaby and nobody cares about these period-correct parts except cork-sniffing **** bastard resellers.
I could pull these parts you want if you had a worthy offer in trade, including a screw for that post-BUD case MXR you need.
Last edited by jhale667; 07-31-2010 at 02:21 PM. Reason: Fuck off, racist asshat
bullshit. you have nothing.
sorry buddy just tryin to help ya locate your parts.
send the manufacturers an email asking about replacement parts.
remember to get a spare nail to drive into BOR's foot.
any good pawn shops scores lately Cato?
that Cry Baby was 27 bucks at a pawnshop I visit regularly.
What have you to trade for my pre-Samick era Valley Arts hum/single/single w/strathead neck?
Cost me $70 bucks out of Valley Pawn in El Monte 2 wks ago..
what kind of moron trades with you?
An imaginary one....
Wishful thinking that anyone would trade with him.....for guitar parts, that is.
He trades blowjobs for crack or wine every day.
Wishful thinking that anyone would trade with him.....for guitar parts, that is.
He trades blowjobs for crack or wine every day.
I love it that some Japanese goofwit asks "where can I find" what I have, and don't need.. then he both disapproves of the advice, and the offer to trade!
Email Dunlop for a set of replacement screws and crybaby rocker feet. The specs are the same as the originals.
You still don't get it do you, ya brain-damaged fuckwit.....
NO ONE WANTS ANYTHING TO DO WITH YOU!
FUCK OFF ALREADY!!!!
Do you have proof you provide anything for this site beyond 11,000 "me, too" posts containing the usual namecalling rituals?
Do YOU? Didn't think so. STFU.
Have I not provided you with an avenue to focus your pitiful dross Valley existance upon as I make my vertical ascension thru career, society and beyond?
Damn Hardrock, how is it you get the double posts all the time and nobody else does?
Bangar, not just a town in Maine.
It's called "spell-check", bitch.
And then you wake up, and realize you're still a freeway underpass dwelling, sucking dick for crack loser-ass troll... ?as I make my vertical ascension thru career, society and beyond?
Damn, my inner 3-year old is crying. At you. Because of the mean things you said.
Betting your inner child was also pissed on by an old man, too? Is that how it started for you GARy?
STFU.
Is that how what happened - the kid staring at my knob in the public showers while I'm bashing the crap out of it with the retractable massage showerhead in the handicapped shower stall trying to get off, n'stuff?
And I'm trying to concentrate like that? If the kid wanted to use the shower head the way I was, well that would have been wrong because that's for the old people.
Litle kids should't masturbate with the showerheads: that's what shih tzsu puppies are for.
STFU, Pervis...
Cato: Just contact the manufacturer of the pedal to get the parts, or try to find them online. Or make them yourself.
Reading Crazy From the Heat in four hours flat, in a cramped RV, on the return trip of a 3,000+ mile family outing to New Jersey is an enlightening experience you'll never forget.
Cato's point is, the manufacturer's don't exist.
JEN may not be around anymore, certainly they haven't contracted assembly for the crybaby since 1975. Although I think the rocker-feet are identical.
MXR hasn't been around since (I think) 1985, Dunlop bought the tooling a couple years later. I think they are the same US standard thread, "8-32" x 5/16" flat cut phillips head."
He's seeking original parts. I just checked my JEN-era wah and the feet are modified.
I usually cut the rocker-feet in half, right at the gap, for a tad extra forward travel - then adjust both footswitch crimping nuts about an 1/8" lower in the case... people in Japan want all-original parts and discriminating over correct parts is like a sushi-bar pissing contest.
Dunlop will have both things he needs, including a Jim Dunlop original MXR/Zakk target-logo colostomy bag. Sam McRae keeps those, but I don't see his email listed on the Dunlop website. Sam's the guy to discuss such things as colostomy bags and vintage pedal parts. He's the engineer!
Last edited by GAR; 08-01-2010 at 08:18 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
